scope
This garment is designed exclusively for use in sport fencing according to the rules of the International Fencing Federation (FIE).
The selection of the correct level of fencing protective equipment depends on the regulations of the respective national fencing federation, as well as the International Fencing Federation (FIE). In any case, we strongly recommend using only protective fencing clothing of the highest level (EN 13567 + A1:2007, Level 2 > 800N, please refer to the label and the front of the accompanying sheet). In any case, an undergarment must also be worn under the fencing jacket. A sabre jacket (without the triangular protection for the lower abdomen) must be worn together with fencing trousers with at least the same level of protection.
Please refer to the chart on our website for the correct size of the underjacket. Fencing protective clothing should be chosen large enough to allow for unrestricted movement.
The protective zones of the garment (shown in grey) are shown in the illustration above (see image gallery).
The following items of clothing are not part of the protection zones:
The rubber bands, which only serve for fastening.
All other fastening and fastening devices such as straps, Velcro fasteners, zippers, etc.
When putting on the undercoat, ensure that all fastening and closure devices (strings, buttons, zippers, Velcro fasteners, etc.) are fully and securely closed. The adjustable elastic fastening straps should be tightened so that they are slightly taut. If the fastening and/or closure devices no longer function properly, the undercoat plastron must no longer be used.
Warnings
This underjacket is designed exclusively for use in competitive fencing according to the rules of the International Fencing Federation (FIE). The selection of the correct level of fencing protective equipment depends on the regulations of the respective national fencing federation. In all cases, we strongly recommend using only protective equipment of the highest level (EN 13567: 2002 + A1: 2007, Level 2). In all cases, a fencing jacket must be worn in addition.
Please refer to the size chart for the correct size of the underjacket. Fencing protective clothing should be chosen large enough to allow for unrestricted freedom of movement.
When putting on the undercoat, ensure that all fastening and closure devices (strings, buttons, zippers, Velcro fasteners, etc.) are fully and securely closed. The adjustable elastic fastening straps should be tightened so that the straps are under slight tension. If the fastening and/or closure devices no longer function properly, the undercoat must no longer be used.
The undervest must be worn under a Level 2 fencing jacket. Fencing, as a combat sport involving physical contact with the fencing weapon, is inherently dangerous. The goal of protective equipment for fencers is to prevent injuries as much as possible or, in the worst case, to minimize the severity of injury, particularly from the tip of the weapon. Broken blades pose a particular threat. The circumstances of a blade breakage can lead to high tip speeds and high-energy impacts. Broken blades are known to penetrate protective clothing with potentially fatal consequences. Protective equipment for fencing cannot guarantee complete protection against injuries—especially from broken blades.
Protective equipment must not be modified or tampered with by the user. In particular, seams must not be undone or other parts added or removed.
Underjackets are designed to be used only by right-handed or left-handed players (weapon-wielding arm) (see marking on the cover sheet). Fencing clothing designed for right-handed players may never be used by left-handed players (and vice versa).
The care instructions must be strictly observed. Failure to comply may result in a reduction in the protective properties. Fencing protective equipment should be checked regularly for any mechanical damage (abrasions, tears, holes, torn seams). In this case, the protective effect may be reduced, and the protective equipment must no longer be used.
The product is washable at 30°C on a delicate cycle. A mild detergent should be used. The undercoat should not be spun or tumble dried, as mechanical stress can reduce its protective effect. All fasteners must be closed before washing.
Store in the original packaging in a cool, dry place away from direct light.
Cleaning, care and storage
The product is washable at 30°C on a delicate cycle. A mild detergent should be used. The undercoat should not be spun or tumble dried, as mechanical stress can reduce its protective effect. All fasteners must be closed before washing.
Store in the original packaging in a cool, dry place away from direct light.
This protective clothing does not contain any substances suspected of adversely affecting the health or hygiene of the user under conditions of normal use.
The EU declaration of conformity can be found here. This protective clothing complies with the health and safety requirements of Regulation 2016/425.
